Loading...
16
TE-5028 Variable Resistance Calibration Kit. This model is recommended for
all Tisch Environmental PM10 Systems. Included: Variable Orifice,
NIST Traceable Calibration Certificate, Adapter Plate, Slack Tube
Manometer, Tubing and Carrying Case.
TE-5007 Seven Day Mechanical Timer, used to turn sampler on and off at
selected times.
PROGRAMMING INSTRUCTIONS
1) To Set “ON” Times, Place Bright ON Trippers Against Edge of Clock-
Dial At Day-of-Week And Time-of-Day When “ON” Operations Are
Desired. Tighten Tripper Screws Securely.
2) To Set “OFF” Times, Place Dark OFF Trippers Against Edge of
Clock-Dial At Time When “OFF” Operations Are Desired. Tighten
Tripper Screws Securely.
3) To Skip Days, Omit Trippers for The Day(s) Automatic Operations
Is/Are Not Required.
4) To Set Dial To Time-Of-Day, Turn Dial Clockwise And Align The
Exact Day-of-Week And Time-of-Day (AM OR PM) On Dial With The Time
Pointer. Some Allowance May Be Required To Compensate for Gear
Backlash.
CAUTION: DO NOT MOVE POINTER OR FORCE DIAL COUNTERCLOCKWISE
OPERATING INSTRUCTIONS
To Operate Switch Manually: Move Manual Lever Below Clock-Dial
Left or Right as Indicated by Arrows. This Will Not Affect Next
Automatic Operation.
In Case of Power Failure or to Advance/Retard Time: Reset Time-Of-
Day
Loading...
Terms of Use | Privacy Policy | DMCA Policy
2006-2020 Rsmanuals.com