Chapter 3 Appendix
RAID 0 RAID 1 RAID 10
Minimum Number of
Hard Drives 2 4
Array Capacity Number of hard drives *
Fault Tolerance No Yes Yes
Before you begin, please prepare the following items:
•Motherboard driver disk.
•A USB thumb drive.
A. Installing hard drives
Install the hard drives/SSDs in the SATA/M.2 connectors on the motherboard. Then connect the power connectors
from your power supply to the hard drives.
Under Chipset, ensure Chipset SATA Port Enable are enabled. Set SATA Mode to RAID. Then save the
settings and restart your computer.
The BIOS Setup menus described in this section may differ from the exact settings for your motherboard.
The actual BIOS Setup menu options you will see shall depend on the motherboard you have and
the BIOS version.
1. In BIOS Setup, go to BIOS and set Windows 10 Features to Windows 10 and CSM Support to Disabled.
Save the changes and exit BIOS Setup.
2. After the system reboot, enter BIOS Setup again. Then enter the
3. On the screen, press <Enter> on Array Management to enter the Create
Physical Disks to enter the Select Physical Disks screen.
- 37 -