Loading...
TE-WILBUR OPERATIONS MANUAL REV 002.15 06/11/2015
Tisch Environmental 1-TSP-AND-PM10 sales@tisch-env.com www.tisch-env.com Page 90 of 183
So if for example, the ambient temperature sensor is unplugged, the history
log screen will be shown notifying the operator that there is a problem. The
ambient temperature sensor notification will be highlighted and will be red.
If the operator plugs the ambient temperature sensor back in, the alarm will
still be highlighted and active until the operator acknowledges the alarm by
pressing the acknowledge alarm button. Once that is pressed, the alarm will
turn black indicating that it is no longer active and the system will be back to
normal.
The alarm/event is time and date stamped when it occurred and when it was
resolved.
The following two colors are used:
RED
Indicates that an event or an alarm is active and is in progress. So
for example when a sample is engaged this will be shown in red on
the history log until that sample is canceled.
BLACK
Indicates that an event or an alarm is no longer active or in
progress. So when an alarm is cleared and then acknowledged it
will be black.
NOTE: When there is an active alarm that requires attention, there will be
this symbol shown on the top right corner of every screen:
The operator can go directly to the history log by pressing this symbol.
Loading...
Terms of Use | Privacy Policy | DMCA Policy
2006-2020 Rsmanuals.com