Loading...
G-PILOT 3100 Operation Manual NAVMAN 27
There are four possibilities for auto tacking or gybing:
Tack (SWA is 90° or less) Gybe (SWA is more than 90°)
Wind
TAK ERROR is displayed if you attempt other tacks or if the tack will end with the boat in irons.
Note
To view or change the tack angle, gybe angle or tack delay, go to TACK ANG, GYBE ANG or
TACK DELY in the OPTIONS menu (see section 3-7).
Press AUTO + <
to tack to port
Press AUTO + >
to tack to starboard
Press AUTO + <
to gybe to port
Example: SWA is 120°, so the boat will gybe.
The tack angle is not set to AUTO:
Example: SWA is 40°. The tack angle is set to
AUTO so the boat changes direction once:
The G-PILOT 3100
counts down the tack
delay.
The G-PILOT 3100
counts down the
tack delay.
Press AUTO + < to
initiate a tack to port
Press AUTO + > to initiate
a gybe to starboard
To cancel the
gybe at any time,
press ESC
End of tack, boat
is at new SWA
End of tack, boat is at new SWA
The course
changes by
the gybe
angle
Wind
The course changes
again so that the SWA
is the same as the
SWA before the tack
The course
changes so
that the SWA
is the same
as the SWA
before the tack
To cancel the
gybe at any time,
press ESC
Wind
Press AUTO + >
to gybe to star-
If SWA is more than 90° and the gybe angle is
set to AUTO then the boat will change direc-
tion once during a gybe, so that the SWA is the
same as the SWA before the gybe.
Loading...
Terms of Use | Privacy Policy | DMCA Policy
2006-2020 Rsmanuals.com