Loading...
6DEPTH 2100 Installation and Operation Manual
NAVMAN
2. When the unit is on, release . The display
will indicate the current display unit with:
8Ft
888
Feet Metres
8FA
Fathoms
3. Use and to change the value.
4. To exit this mode, press and hold both and
simultaneously. Alternatively, if no keys are
pressed for a period of 5 seconds normal depth
display will resume.
OFFON
^V
Press simultaneously
The display will now indicate the current water
depth in the selected display unit.
Multiple Depth 2100 instruments can be installed on
a single vessel. These instruments can be connected
together and configured to operate in a dual station
configuration. One instrument is designated as a
master and all other instruments, connected to it,
are configured as slaves. The master device is
connected to the depth transducer and determines
the water depth. This information is then displayed
on all slave devices connected to it. Slave devices
do not have transducers connected to them.
The slave devices can be configured to operate as
fully functional NMEA repeaters where they display
water depth, as displayed on the master device, and
share common alarm settings and keel offset values.
In this mode the common alarm settings can be
changed or activated/deactivated from either the
master or slave devices.
Alternatively, the slaves can be configured to operate
as independent slaves. In this mode the slaves display
the water depth received from the master, but have
independent alarm settings and keel offset values.
Note: The instrument designated as the
master device is the only instrument connected to
the depth transducer.
3 Dual Station Operation
Master/Slave Selection
To select the master/slave mode of operation:
1. Apply power while holding down .
OFF
V
Hold down during power up
2. When the unit is on. The display will indicate
the current display unit:
8Ft
example
3. Continue to hold until the display indicates
the current master/slave selection.
Master Slave
4. Use and to change the selection.
5. To exit this mode, press and hold both and
simultaneously. Alternatively, if no keys are
pressed for a period of 5 seconds normal
depth display will resume.
OFFON
^V
Press simultaneously
Note: If the data link is inadvertently brocken then
the display will alternate between -- and -SL.
Loading...
Terms of Use | Privacy Policy | DMCA Policy
2006-2020 Rsmanuals.com