Loading...
- 32 -
Hardware Installation
12) D_LED1/D_LED2 (Addressable LED Strip Headers)
The headers can be used to connect a standard 5050 addressable LED strip, with maximum power rating
of 5A (12V or 5V) and maximum number of 1000 LEDs. There are 12V and 5V addressable LED strips.
Be sure to verify the voltage requirements of your addressable LED strip and set the DLED_V_SW1 and
DLED_V_SW2 jumpers accordingly.
Pin No. 
1 V
2 D
3 No Pin
4 G
1
1
D_LED1
D_LED2
Connect one end of the included addressable LED strip adapter
cable to this header and the other end to your addressable LED
strip. The power pin (marked with a triangle on the plug) of the
LED strip must be connected to Pin 1 of the addressable LED
strip header. Incorrect connection may lead to the damage of
the LED strip.
Addressable LED
strip adapter cable
1
13) DLED_V_SW1/DLED_V_SW2 (Addressable LED Strip Power Select Jumpers)
The jumpers allow you to select the supply voltage of the D_LED1 and D_LED2 headers. Be sure to verify
the voltage requirements of your addressable LED strip and set the correct voltage with this jumper before
connection. Incorrect connection may lead to the damage of the LED strip.
1
1
1
1
1-2: 5V (Default)
1-2: 5V (Default)
2-3: 12V
2-3: 12V
DLED_V_SW1
DLED_V_SW2
Before installing the devices, be sure to turn off the devices and your computer. Unplug the power
cord from the power outlet to prevent damage to the devices.
Loading...
Terms of Use | Privacy Policy | DMCA Policy
2006-2020 Rsmanuals.com