Loading...
- 103 - Appendix
Figure 4
Figure 5

in the right block of the screen and press <Enter> (Figure 4). Set the required items in sequence and press
<Enter> after each step.
Steps:
1. RAID Level: Select a RAID level. Options include RAID 0 (Stripe) and RAID 1 (Mirror).
2. Stripe Size: Select the stripe block size. Options include 32 KB and 64 KB.
3. Gigabyte Rounding: Select whether to permit the installation of a replacement drive that is smaller than
the failed drive when performing a RAID 1 rebuild. Options include None, 1G, and 10G.
4. Quick Init: Select whether to quickly erase old data on the hard drives when creating the array.
5. VD Name: Enter an array name with 1~10 letters (letters cannot be special characters).
Marvell BIOS Setup (c) 2009 Marvell Technology Group Ltd.
> Select free disksCreate Virtual Disk
Help

ENTER: Operation F10: Exit/Save ESC: Return
RAID Level : RAID 0
Max Size (MB) : 152378
Stripe Size : 64KB
Gigabyte Rounding : 1G
Quick Init : Yes
VD Name : Default
Disks ID : 0 8
Next
HBA 0 : Marvell 0
Virtual Disks
Free Physical Disks
* PD 0: WDC WD800JD-22L
* PD 8: WDC WD800JD-22L
6. Next: After completing the settings above, move to Next and press <Enter> to begin creating the array.

Marvell BIOS Setup (c) 2009 Marvell Technology Group Ltd.
> Select free disksCreate Virtual Disk
Help

ENTER: Operation F10: Exit/Save ESC: Return
RAID Level : RAID 0
Max Size (MB) : 152378
Stripe Size : 64KB
5
VD Name : Default
Disks ID : 0 8
Next
HBA 0 : Marvell 0
Virtual Disks
Free Physical Disks
* PD 0: WDC WD800JD-22L
* PD 8: WDC WD800JD-22L
Do you want to create this virtual disk?
Yes No
Create Virtual Disk
Loading...
Terms of Use | Privacy Policy | DMCA Policy
2006-2020 Rsmanuals.com