Appendix - 96 -
After the POST memory test begins and before the operating system boot begins, look for a message which
says "Press <Ctrl-G> to enter RAID Setup Utility" (Figure 2). Press <Ctrl> + <G> to enter the RAID setup util-
GIGABYTE Technology Corp. PCI Express to SATAII HOST Controller ROM v1.07.06
Copyright (C) 2005-2009 Gigabyte Technology Corp. (http://www.gigabyte.com)
HDD0 : ST3120026AS 120 GB Non-RAID
HDD1 : ST3120026AS 120 GB Non-RAID
Press <Ctrl-G> to enter RAID Setup Utility ...
Figure 2
In the main screen of the RAID setup utility (Figure 3), use the up or down arrow key to highlight
through choices in the Main Menu block. Highlight the item that you wish to execute and press
Note: In the main screen, you can select a hard drive in the Hard Disk Drive List block and press <Enter> to
see detailed information about the selected hard drive.
Figure 3
[fgTAB]-Switch Window [hi]-Select ITEM [ENTER]-Action [ESC]-Exit
[ RAID Disk Drive List ]
[ Main Menu ] [ Hard Disk Drive List ]
Gigabyte Technology Corp. RAID Setup Utility v1.07.06
Create RAID Disk Drive
Delete RAID Disk Drive
Revert HDD to Non-RAID
Rebuild Mirror Drive
Save And Exit Setup
Exit Without Saving
Model Name Capacity Type/Status
HDD0: ST3120026AS 120 GB Non-RAID
HDD1: ST3120026AS 120 GB Non-RAID
Terms of Use | Privacy Policy | DMCA Policy
2006-2020 Rsmanuals.com