20 NAVMAN G-PILOT 3380 System Installation Manual
1 Find a suitable location for the unit as described above.
2 Mount the unit with the three screws provided. Use a level to ensure the unit is vertical to
3 Wire the cable back to the MCU600, following the wiring guide (see section 3-2-2).
Less than 10° 10°
Plug connector into the Compass/HS socket
Holes in the bulkheads
must be at least 18.5 mm
(0.73 in) diameter.
If you move the compass with respect to the gyro while the power is on, wait for the heading to stabilize.