Loading...
8NAVMAN WIND 3150 Installation and Operation Manual
5 Display wind speed
To display wind speed, press until the speed is
displayed, for example:
If the WIND 3150 is connected to a boat speed
instrument, press to display TRUE or APP
(apparent) wind angle (see section 3).
4-1 Set wind damping
Wind turbulence, gusts and mast motion cause the
measured wind angle and speed to fluctuate. To give
stable readings, the WIND 3150 calculates wind
angle and speed by measuring the values several
times and averaging the measurements. The wind
damping value ranges from 1 to 5:
A lower value averages measurements over a
shorter period of time. This gives the most
accurate readings but has the most
fluctuations.
A higher value averages measurements over
a longer period of time. This gives the most
stable readings but will ignore some rapid
changes.
Note: Set the damping to the lowest value which
gives stable readings. Values of 1, 2, 3, 4 and 5
average measurements over a time period of 6, 12,
18, 24 and 30 seconds respectively.
To set the damping:
1 Press + to display the Wind Damping
screen:
4 Display wind angle
Wind from 30° to starboard
Wind from 120° to port
Wind angle
The pointer shows wind angle in degrees (0 to 180°
port or starboard). To display the numeric wind angle
as well, press until the degrees symbol is
displayed, for example:
Damping
equals 3
(flashes)
Degrees symbol
If the WIND 3150 is connected to a boat speed
instrument, press to display TRUE or APP
(apparent) wind speed (see section 3).
5-1 Set wind speed units
To change the wind speed units to KNOTS
or M/S:
Hold until the units change.
Note: VMG is always shown in knots.
Wind
angle
2 Press or to change the damping.
3 Press .
Loading...
Terms of Use | Privacy Policy | DMCA Policy
2006-2020 Rsmanuals.com