Loading...
17FISH 4200 Installation and Operation Manual
NAVMAN
Alarms automatically re-enable
The TOO SHALLOW, TOO DEEP and LOW
BATTERY alarms automatically re-enable when the
value moves outside the alarm trigger setting.
The TEMP VALUE alarm automatically re-enables
when the temperature is more than 0.45°F (0.25°C)
above or below the alarm trigger setting.
The TEMP RATE alarm automatically re-enables
when the rate of temperature change falls below the
trigger setting by more than 0.2°F (0.1°C) per minute.
Flashing Light and/or External Beeper
If a secondary alarm indicator is required, a flashing
light and/or external beeper can be installed. These
can be positioned anywhere suitable on the boat.
For installation advice see section 5-4.
Enabling Alarms and Changing Trigger
Values
Press or to highlight an alarm, then press to
select it. To enable or disable an Alarm, press to
switch between ON and OFF.
To set the trigger value for an Alarm, press or to
increase or decrease the trigger value.
The alarm trigger value is retained even when the
alarm is disabled.
Loading...
Terms of Use | Privacy Policy | DMCA Policy
2006-2020 Rsmanuals.com