Loading...
FISH 4100 Installation and Operation Manual NAVMAN 21
Depth range
· 0.6 m (2 ft ) to 180 m (600 ft)
Display type
· FSTN
· Screen resolution 160 high x 120 wide (pixels).
· Yellow multi-level back lighting.
Supply voltage
· 10 to 16.5 V DC.
Supply current
· 120 mA min - no backlighting.
· 180 mA max - full backlighting.
Operating temperature
· 0 to 50°C (32 to 122°F).
Transom transducer cable length
· FISH 4100 - 10 m (33 ft ).
· FISH 4150 - 8 m (26 ft).
Typical depth acquisition time from startup
· 2 seconds at 100 feet (30.5 m).
Transducer frequency
· 200 kHz
Transducer power
· 150 Watts RMS @ 13.8 V DC (during burst).
Receiver sensitivity
· Better than 10 micro volts RMS.
· Dynamic range 4.0 million to 1 (120 dB).
Standards Compliance
· EMC: USA FCC Part 15 Class B.
Europe (CE) EN50081-1 and EN50082-1
New Zealand and Australia (C Tick)
AS-NZS 3548
· Environment: IP67
Appendix A - Specifications
The following specifications relate to
the FISH 4150 only:
Temperature measurement range
· 0 to 37.7°C (32 to 99.9°F) Resolution 0.1 units.
Speed range
· 1 to 50 kn (57.5 mph, 96.6 kph).
Speed resolution
· 0.0 to 9.9, 10 to 50.
Communications
· NMEA 0183 (Ver 2.0) 4800 Baud.
NMEA output
NMEA (0183 format) is a standard for interfacing
marine electronic devices. The NAVMAN fishfinder
can output the following data:
· DBT (Depth Below Transducer).
· DPT (Depth and Keel offset).
· TDK (Depth NAVMAN NZ - proprietary).
· TKV (Speed NAVMAN NZ - proprietary).
· VHW (Speed).
· MTW (Water temperature).
· XDR (Battery voltage).
126.0 mm (5")
27.9 mm
(1.1")
30.5 mm
(1.2")
143.5 mm (5.6")
126.0 mm (5")
88.5 mm (3.5")
Loading...
Terms of Use | Privacy Policy | DMCA Policy
2006-2020 Rsmanuals.com