
TE-5170D-BL TSP MFC 29 Operations Manual
The TE-303 digital timer has an internal battery backup so in case of a power
failure the timer will remain set and will continue when power is reapplied.
During a power failure the timer will continue to run and will stop and start
exactly as it is programmed (for example, if the timer is scheduled to start at
9:00 and run for 24 hours, it will stop exactly 24 hours from the start-time
regardless of a power failure).
Checking/Resetting the Elapsed Time Indicators (ETI):
The TE- has built in ET)’s; one ET) is to track motor life, one for
calibration frequency, and one for user based events. The ET)’s can be reset
at any time and also have a feature that allows the user set alert reminders
for tracking motor life, calibration frequency or user based event.
1. Press F for set-up
2. Select ET) and press ENT
3. To reset ET)’s, select desired ET), press ENT, confirm YES or NO,
and press ENT
4. To Set ALERT, select desired ET) ALERT, press ENT, enter alert, set
point, press ENT
5. Press ESC to return to the main status screen
Manual Motor Control:
The TE-303 digital timer is equipped with a manual motor control feature.
This feature allows the user to turn the motor (or whatever is plugged into
the AC out timed cord) to be turned on/off without using the timer.
1. Press F for SETUP
2. Select D)AGNOST)CS, press ENT
3. Select MOTOR, press ENT to toggle the motor on/off
4. Be sure that the MOTOR is in the OFF position before exiting this
menu
5. Press ESC to return to the main status screen
Please visit www.tisch-env.com for a complete TE-303 Digital Timer manual.