Loading...
BIOS Setup - 118 -
Parameter Description

Press [Enter] for more options.
XHCI Controller0 Enable
Enable or disable USB3 controller.
Options available: Enabled/Disabled/Auto. Default setting is Auto.
XHCI Controller1 Enable
Enable or disable USB3 controller.
Options available: Enabled/Disabled/Auto. Default setting is Auto.
USB ecc SMI Enable
Options available: Enabled/Off/Auto. Default setting is Auto.
MCM USB enable

SD Dump Options
Press [Enter] for more options.

Select SD Mode.
Options available: SD Dump disabled/SD Dump Enabled. Default
setting is SD Dump disabled.
AC Power Loss Options
Press [Enter] for more options.
AC Loss Control
Select AC Loss Control Method.
Options available: Power Off/Power On/Last State. Default setting
is Last State.

Press [Enter] for more options.
I2C 0/1/2/3/4/5 Enable
Enable or disable I2C 0/1/2/3/4/5.
Options available: Disabled/Enabled/Auto. Default setting is Auto.

Press [Enter] for more options.
Uart 0 Enable
Uart 0 has no HW FC if Uart 2 is enabled.
Options available: Disabled/Enabled/Auto. Default setting is Auto.
Uart 1 Enable
Uart 1 has no HW FC if Uart 3 is enabled.
Options available: Disabled/Enabled/Auto. Default setting is Auto.
Uart 2 Enable (no HW FC)
Options available: Disabled/Enabled/Auto. Default setting is Auto.
Uart 3 Enable (no HW FC)
Options available: Disabled/Enabled/Auto. Default setting is Auto.

Press [Enter] for more options.
ESPI Enable
Options available: Disabled/Enabled/Auto. Default setting is Auto.
Loading...
Terms of Use | Privacy Policy | DMCA Policy
2006-2020 Rsmanuals.com