Loading...
BIOS Setup - 84 -
Parameter Description
COM1/SOL / COM2 Console
Redirection Settings
(continued)
Bits per second
Selects the transfer rate for console redirection.
Options available: 9600/19200/38400/57600/115200. Default setting
is 115200.
Data Bits
Selects the number of data bits used for console redirection.
Options available: 7/8. Default setting is 8.
Parity
A parity bit can be sent with the data bits to detect some
transmission errors.
Even: parity bit is 0 if the num of 1's in the data bits is even.
Odd: parity bit is 0 if num of 1's in the data bits is odd.
Mark: parity bit is always 1. Space: Parity bit is always 0.
Mark and Space Parity do not allow for error detection.
Options available: None/Even/Odd/Mark/Space. Default setting is
None.
Stop Bits
Stop bits indicate the end of a serial data packet. (A start bit
indicates the beginning). The standard setting is 1 stop bit.
Communication with slow devices may require more than 1 stop bit.
Options available: 1/2. Default setting is 1.
Flow Control

sending data, if the receiving buffers are full, a 'stop' signal can


two wires to send start/stop signals.
Options available: None/Hardware RTS/CTS. Default setting is
None.
VT-UTF8 Combo Key Support
Enable/Disable the VT-UTF8 Combo Key Support.
Options available: Enabled/Disabled. Default setting is Enabled.
Recorder Mode(Note)
When this mode enabled, only texts will be send. This is to capture
Terminal data.
Options available: Enabled/Disabled. Default setting is Disabled.
Resolution 100x31(Note)
Enable/Disable extended terminal resolution.
Options available: Enabled/Disabled. Default setting is Enabled.
Putty KeyPad(Note)
Selects FunctionKey and KeyPad on Putty.
Options available: T100/LINUX/XTERMR6/SCO/ESCN/VT400.
Default setting is VT100.
 
Loading...
Terms of Use | Privacy Policy | DMCA Policy
2006-2020 Rsmanuals.com