Loading...
TE-WILBUR OPERATIONS MANUAL REV 002.22 4/27/2017
Tisch Environmental 1-TSP-AND-PM10 sales@tisch-env.com www.tisch-env.com Page 139 of 185
13.17 Touch Screen Replacement
If the touch screen needs replaced, perform the following:
The part number for the touch screen is TE-W-100 with the following related
part numbers:
TE-W-106
32MB SD Card
TE-W-105
Cable from screen to controller
TE-W-207
USB interconnection cable
TE-W-216
3ft RJ45 patch cable
WARNING Before opening covers to perform maintenance, ensure unit is
powered down completely. To power down completely, remove mains power
and disconnect the battery at:
MAIN MENU
MAINTENANCE
MENU
BATTERY
DISCONNECT
1. Remove both the upper and lower left plates using a Phillips
screwdriver.
2. Turn the upper plate over and disconnect the following connectors on
the screen:
The 24VDC power to the screen
The communication cable to the controller
The Ethernet cable
The USB interconnect cable
3. Remove the SD card from the side by pressing it in to eject, then pulling
out completely.
Loading...
Terms of Use | Privacy Policy | DMCA Policy
2006-2020 Rsmanuals.com