TE-WILBUR OPERATIONS MANUAL REV 002.22 4/27/2017
Tisch Environmental 1-TSP-AND-PM10 firstname.lastname@example.org www.tisch-env.com Page 159 of 185
To change the IP address / Subnet of the sampler perform the following steps:
Press and hold the top right corner of the touchscreen to enter Maintenance
mode and the following screen will appear:
Press system mode to enter the internal setup of the touch screen and the
following screen will appear. Press Offline.
NOTE: Care must be taken when entering the Maintenance Mode of the touch
screen. Failure could result if the wrong keys are pressed.