TE-WILBUR OPERATIONS MANUAL REV 002.22 4/27/2017
Tisch Environmental 1-TSP-AND-PM10 email@example.com www.tisch-env.com Page 160 of 185
Now press the following menu buttons:
Use the keypad to enter the desired IP address and subnet mask. Press the enter
button to apply the entered values.
Press Exit to return, then at the Main Menu, press the RUN button to start the
system and return to the sampler’s operation screens.
15.3 Webserver Functions
To access the webserver functions, the sampler must be hooked up to a network
and configured for the correct subnet.
Using a standard browser that supports frames (IE 8.0 and higher is
recommended or Google chrome) open a new browser window and type the
following in the address bar:
Where 192.168.1.123 is the touchscreen’s IP address, if this address has
changed, then you must type the new address in the address bar.
A security window will appear to enter a username and password:
The user name is ‘Wilbur’ which is case sensitive so the capital ‘W’ must be
used in the username field.
Leave the password field empty, there is no password.