Loading...
TE-WILBUR OPERATIONS MANUAL REV 002.22 4/27/2017
Tisch Environmental 1-TSP-AND-PM10 sales@tisch-env.com www.tisch-env.com Page 46 of 185
6. Using a soft brush, cloth and cotton swabs, lightly scrub all interior
surfaces and the bug screen with distilled water and / or general purpose
cleaner.
7. Check the o-ring around the upper unit that seals the upper and lower
pieces for wear and damage. Replace if worn or damaged
8. Check the 2 o-rings in the bottom of the inlet for wear and damage.
Replace if worn or damaged.
9. Place a small amount of o-ring grease around the o-ring that seals the
upper and lower units.
10. Screw the upper and lower unit back together carefully.
11. Place a small amount of o-ring grease around the 2 o-rings on the
bottom.
12. Screw the jar back into the inlet and place the inlet back onto the
downtube.
The PM10 Inlet has the following O-rings that should be inspected for wear and
replaced as needed.
Quantity
Description
Part Number
2
Exit Adapter O-Rings
TE-W-022
1
Impactor Nozzle O-Ring
TE-W-023
2
Downtube O-Rings
TE-W-021
These can also be ordered together in a kit by part number TE-W-020.
There are also O-rings located in the black downtube adapter and those can be
ordered using part number TE-W-024.
5.3 TE-PM2.5C Cyclone
The TE-PM2.5C is a PM2.5 particle fractionator that utilizes a cyclonic effect
to separate ambient particles that have an aerodynamic diameter less than
2.5um. The cyclone is placed directly underneath the PM10 inlet to achieve
PM2.5 collection.
Loading...
Terms of Use | Privacy Policy | DMCA Policy
2006-2020 Rsmanuals.com