Loading...
TE-WILBUR OPERATIONS MANUAL REV 002.22 4/27/2017
Tisch Environmental 1-TSP-AND-PM10 sales@tisch-env.com www.tisch-env.com Page 88 of 185
TVar avg
The average temperature variance between the ambient
temperature sensor and the filter temperature sensor in
degrees Celsius over the time of the datalog timer.
TVar max
The maximum temperature variance between the ambient
temperature sensor and the filter temperature sensor in
degrees Celsius over the time of the datalog timer.
TVar min
The minimum temperature variance between the ambient
temperature sensor and the filter temperature sensor in
degrees Celsius over the time of the datalog timer.
Flow total
The total flow in liters updated based on the time of the
datalog timer. If the sample has stopped this will be the total
flow of the last sample completed. The flow total is reset to
zero when a new sample is started.
Flow CV
The flow coefficient of variance from the start of the datalog
timer to the end of the datalog timer.
Filter ID
The filter ID entered by the operator.
Site ID
The site ID entered by the operator.
Unit S/N
The serial number of the sampler.
NOTE: The datalog will fill up after its size allocation is exceeded. When this
happens the older data will get replaced by the newer data. If the data
log is set to the 5 minute recommended setting, it will take several
years to fill up the data log.
The larger the data and history logs are, the longer it will take to copy
them to the USB stick. Resetting them periodically is recommended.
Loading...
Terms of Use | Privacy Policy | DMCA Policy
2006-2020 Rsmanuals.com