Loading...
TE-CD-TSP 47 Operations Manual
TIMER
The VFC+ controller contains a microprocessor-based timer that allows for a variety of timing options
including:
Single Occurrence Timed Event
Repeating Timed Event (ideal for 1 in X day sample operating protocols)
Flexible Remotely Triggered Timed Event (requires optional remote trigger cable)
This section documents the possible configurations that can be used with the timer. To access the timer
setup menu, press the “F1” soft-menu function key while the main status display screen is displayed. If
the timer is not currently executing, the Timer Setup menu will be displayed. If the timer is currently
executing, the option to the “Abort Timer” menu will be displayed.
Note: That timer event will not be started while the Timer Setup menu is displayed. For this reason, it
is important to always use the SAVE and EXIT menu item after the timer has been configured.
TIMER SETUP MENU: Basic Timer with Optional Repeat
The TIMER SETUP menu allows the user to configure the operation of the timer as desired to meet
sampling protocols. The details of the timer setup parameters are described below.
TIMER SETUP
04-01-07 12:00:01
DATE: 04-20-07
TIME: 00:00
DURATION: 24:00
REPEAT: 00:00
SAVE and EXIT
STOP and EXIT
The figure above displays an example of the Timer Setup menu. For convenience, the current time and
data are displayed on the second line. The details of each menu item are described below.
Loading...
Terms of Use | Privacy Policy | DMCA Policy
2006-2020 Rsmanuals.com