TE-PNY1123 15
Lid Hardware
5 pcs 10-24 x 1/2 pan head screws
5 pcs 10-24 stop nuts
1 pc 6-32 x 3/8 pan head screw
1 pc 6-32 hex nut
pc " chain with S hook
1 pc TE-5001-10-9 roof back
catch
1 pc TE-5001-10-10 front catch
1 pc TE-5001-10-11 rear lid hasp
Step 1
Secure TE-5001-10-10 front catch to the
shelter using 2 10-24 pan head screws
with stop nuts. *Do not tighten completely,
this may need to be adjusted after final
assembly*
Step 2
Secure TE-5001-10-9 roof back catch to
the back of shelter using #6-32 pan head
screw with stop nut.
Step 3
Secure TE-5001-10-11 rear lid hasp
inside the lid with the slot angled up
using (2) #10-24 pan head screws with
stop nuts. *Do not tighten completely, this
may need to be adjusted after final
assembly*
Step 4
Remove (4) #10- x ½ pan head screws
from the rear of the shelter, attach the lid
to the shelter by placing the lid hinge
plates on the OUTSIDE of the shelter,
line the hinges up with the (4) threaded
holes in the back of the shelter. Use the
(4) #10-X ½ pan head screws that
were removed preciously to attach the lid
hinges to the shelter. *Tighten
completely*
