TE-5170DV TSP VFC 6 Operations Manual
The following manual will instruct you in the unpacking, assemblage, operation,
calibration, and usage of the corresponding Tisch Environmental product. For
information on air sampling principles, procedures and requirements and to ensure
compliance with government regulations please contact the local Environmental
Protection Agency Office serving your area or visit www.epa.gov.
Before using Tisch Environmental products, always be sure to review the
corresponding operations manuals and take all necessary safety precautions. Tisch
Environmental products are to be used only for the purposes specified by
operations manuals and by Tisch Environmental personnel. Tisch Environmental
cannot guarantee the safe usage of its instruments in procedures that do not adhere
to Tisch Environmental guidelines and standards. If you have concerns about the
safety of your product or questions about safe practices, contact Tisch
Environmental by phone or e-mail to speak with a representative.
Important Safety Instructions
Read and understand all instructions. Do not dispose of these instructions. Failure to follow all
instruction listed in this manual may result in electric shock, fire, and/or personal injury. When using an
electrical device, basic precautions must always be followed, including the precautions listed in the
safety section of this manual. Never operate this unit in the presence of flammable materials or vapors
are present as electrical devices may produce arcs or sparks that can cause fire or explosions. Always
disconnect power supply before attempting to service or remove any components. Never immerse
electrical parts in water or any other liquid. Always avoid body contact with grounded surfaces when
plugging or unplugging this device is wet or dangerous conditions.