Loading...
TE-5170DV-BLX & TE-5170BLXZ 8 Operations Manual
Product Description
Introduction
The High Volume Air Sampler (also known as a lead sampler) is the recommended
instrument for sampling large volumes of air for the collection of TSP (Total
Suspended Particulate). The physical design of the sampler is based on aerodynamic
principles that result in the collection of particles of 100 microns (Stokes Equivalent
Diameter) and less. The TE-5170DV-BL TSP VFC sampler consists of a TE-5001
Anodized Aluminum Shelter, TE-5001-10 Gabled Roof Assembly, TE-5070-BL
Brushless Blower Motor Assembly, TE-5003V 8x Stainless Steel Filter (older with
pressure tap, TE-53 3 Water Manometer, TE-10618 Male Stagnation fitting, TE-
5009 Continuous flow/pressure recorder, TE-10557TSP-BL Volumetric Flow
Controller, and TE-303 Digital Timer/Elapsed Time Indicator(110volt installations
require TE-10965 step up transformer..
Applications
Ambient air monitoring to determine suspended particulate levels relative to air
quality standards.
Impact of a specific source on ambient levels of suspended particulates by
incorporating a "wind-direction-activation" modification which permits the
sampler to operate only when conditions are such that a source-receptor
relationship exists.
Monitoring of enclosed environments for relatively high levels of particulate
matter, particularly toxic materials.
Monitoring of emissions from large diameter vents where physical conditions
preclude the use of conventional stack-testing equipment.
Calibration Requirements
TE-5170DV-BL TSP VFC High Volume Air Sampler should be calibrated:
Upon installation
After any motor maintenance
Once every quarter (three months)
After 360 sampling hours
Loading...
Terms of Use | Privacy Policy | DMCA Policy
2006-2020 Rsmanuals.com