3. Enter the router user name and password.
The user name is admin. The default password is password. The user name and password are
The BASIC Home page displays.
4. Select ADVANCED > Advanced Setup > VLAN/IPTV Setup.
The VLAN/IPTV Setup page displays.
5. Select the Enable VLAN/IPTV Setup check box.
The page expands.
6. Select the By bridge group radio button.
The page expands.
7. Select a Wired Ports check box or a Wireless check box:
If your device is connected to an Ethernet port on the router, select the Wired Ports check box that
corresponds to the Ethernet port on the router to which the device is connected.
If your device is connected to your router’s WiFi network, select the Wireless check box that
corresponds to the router’s WiFi network to which the device is connected.
You must select at least one Wired Ports or Wireless check box.You can select more
than one check box.
8. Click the Apply button.
Your settings are saved.
Custom Static Routes
Typically, you do not need to add static routes unless you use multiple routers or multiple IP subnets on
your network.
As an example of when a static route is needed, consider the following case:
Your main Internet access is through a cable modem to an ISP.
Your home network includes an ISDN router for connecting to the company where you are employed.
This router’s address on your LAN is
Your company’s network address is
When you set up your router, two implicit static routes were created. A default route was created with your
ISP as the gateway, and a second static route was created to your local network for all 192.168.1.x addresses.
With this configuration, if you try to access a device on the network, your router forwards your
request to the ISP.The ISP forwards your request to the company where you are employed, and the company
firewall is likely to deny the request.
In this case you must define a static route, telling your router to access through the ISDN router
at Here is an example:
Network Settings
Nighthawk X6S AC4000 Tri-Band WiFi Router
Terms of Use | Privacy Policy | DMCA Policy
2006-2020 Rsmanuals.com