Loading...
8. To manage access for currently connected computers and devices, do the following:
If you blocked all new devices from connecting, to allow the computer or device that you are currently
using to continue to access the network, select the check box next to your computer or device in the
table, and click the Allow button.
To either continue to allow or to block other computers and devices that are currently connected,
select the check box next to the computer or device in the table, and click either the Allow button or
the Block button.
9. Click the Apply button.
Your settings are saved.
Manage Network Access Control Lists
You can use access control to block or allow access to your network. An access control list (ACL) functions
with the MAC addresses of wired and WiFi devices that can either access your entire network or are blocked
from accessing your entire network.
The modem router can detect the MAC addresses of devices that are connected to the network and list the
MAC addresses of devices that were connected to the network.
Each network device owns a MAC address, which is a unique 12-character physical address, containing
the hexadecimal characters 0–9, a–f, or A–F (uppercase or lowercase) only, and separated by colons (for
example, 00:09:AB:CD:EF:01). Typically, the MAC address is on the label of the WiFi card or network
interface device. If you cannot see the label, you can display the MAC address using the network configuration
utilities of the computer. You might also find the MAC addresses through the web pages of the modem
router (see View Devices Currently on the Network on page 170).
Add Devices to or Remove Them From the Allowed List
If you set up an access list that blocks all new devices from accessing your network, you must specify which
devices are allowed to access your network.
To add or remove devices that are allowed:
1. Launch a web browser from a computer or mobile device that is connected to the network.
2. Enter http://www.routerlogin.net.
A login window opens.
3. Enter the modem router user name and password.
The user name is admin. The default password is password. The user name and password are
case-sensitive.
The BASIC Home page displays.
4. Select ADVANCED > Security > Access Control.
The Access Control page displays.
5. Click the View list of allowed devices not currently connected to the network link.
A table displays the detected device name, MAC address, and connection type of the devices that are
not connected but allowed to access the network.
6. To add a device to the allowed list, do the following:
Control Access to the Internet
95
Nighthawk AC1900 WiFi VDSL/ADSL Modem Router Model D7000v2
Loading...
Terms of Use | Privacy Policy | DMCA Policy
2006-2020 Rsmanuals.com