8 Connecting the base station
Connecting the base station with the router (Internet)
Connecting the PC to the router (optional)
You can change the settings on the phone's base station using a PC connected to your phone via
the router.
>Connect the PC network connection to a free LAN socket on your router.
Connect one Ethernet cable plug to the
LAN socket at the side of the base station.
Insert the second Ethernet cable plug
into a LAN socket on the router.
Use the Ethernet cable supplied.
As soon as the cable connecting the phone and router is
plugged in and the router is switched on, the key lights up
on the front of the base station (paging key).
>The procedure below requires that your phone is automatically assigned an IP address by
the router (i.e. DHCP is enabled on router and phone).
In exceptional cases (e.g. if DHCP is not enabled on the router) you will have to assign a
static IP address to the base station for LAN access. You must enter this IP address on the
handset before carrying out the following steps. Further information can be found in the
user guide on the enclosed CD.
The following handset menu can be used to make the entry:
§Menu§ ¢m Settings ¢Base ¢Local Network ¢(enter system PIN)
>IP should be set as the default line for your phone (default setting). You will then immedi-
ately receive corresponding messages if a connection to the provider's VoIP server cannot be
established due to incorrect/incomplete data.
Terms of Use | Privacy Policy | DMCA Policy
2006-2020 Rsmanuals.com