Loading...
9Saving VoIP access data
Precondition for the following steps:
Before you can use VoIP to phone any other subscribers on the Internet, the fixed line network or
the mobile phone network, you need a VoIP account.
>Set up a VoIP account with a VoIP provider.
>Have the VoIP account data you received from your VoIP provider to hand.
You will need:
>Your registration name (login ID), your password and, if applicable (provider-dependent), a user
name (often this is your VoIP phone number).
Or
>Your personal auto-configuration code (activation code), if your provider supports "automatic
configuration".
Starting the configuration process
Instead of using the following procedure, you can also enter the VoIP access data using your PC
(steps to ):
>Launch the Web browser on your PC.
>Enter the URL http://www.Gigaset-config.com in the address field of the Web browser and
press the return key.
You are connected to your base station's Web configurator. You can find a description of the Web
configurator in the user guide on the enclosed CD.
When your handset is sufficiently charged
(approx. 20 minutes after you have placed it in the charg-
ing cradle), the message key f on the handset flashes.
>Press the message key f on the handset.
If "Update firmware?" is shown in the display, an updated firmware is already available on the
Internet for your phone. Press the right-hand display key §Yes§.
The new firmware is loaded. The process takes approx. 3 minutes. The message key f will
now flash again.
>Press the message key f to start configuration.
7
11
7
Loading...
Terms of Use | Privacy Policy | DMCA Policy
2006-2020 Rsmanuals.com