Loading...
To connect a device manually to the WiFi network of the access point:
1. Make sure that the access point is receiving power (its Power LED is lit) and that the WiFi radios are
on (the WiFi LED is lit).
2. On the WiFi device that you want to connect to your access point, open the software application that
manages your WiFi connections.
This software scans for all WiFi networks in your area.
3. Look for the access point’s network and select it.
The default WiFi network name (SSID) for the 2.4 GHz radio band and the default SSID for the 5 GHz
radio band are listed on the access point label.
4. Enter the WiFi passphrase.
The default WiFi passphrase is listed on the access point label.
5. Click the Connect button.
The device connects to the WiFi network of the access point.
Wi-Fi Protected Setup Method
Wi-Fi Protected Setup (WPS) is a standard for easily adding computers and other devices to a home network
while maintaining security. To use WPS (Push 'N' Connect), make sure that all WiFi devices to be connected
to the network are Wi-Fi certified and support WPS. During the connection process, the client gets the
security settings from the access point so that every device in the network supports the same security
settings.
To use WPS to connect a device to the WiFi network of the access point:
1. Make sure that the access point is receiving power (its Power LED is lit) and that the WiFi radios are
on (the WiFi LED is lit).
2. Check the WPS instructions for your computer or WiFi device.
3. Press the WPS button of the access point for three seconds.
4. Within two minutes, press the WPS button on your WiFi device, or follow the WPS instructions that
came with the device.
The WPS process automatically sets up the device with the network password and connects the device
to the WiFi network of the access point.
Install and Access the Access Point in Your Network
19
802.11ac Wireless Access Point Model WAC104
Loading...
Terms of Use | Privacy Policy | DMCA Policy
2006-2020 Rsmanuals.com