Loading...
A login window opens.
c. Enter the access point user name and password.
The Home page displays. The firmware version is stated in the Firmware Version field of the AP
Information panel.
8. Read the new firmware release notes to determine whether you must reconfigure the access point after
updating.
Manually Upload New Firmware and Update the Access Point
Downloading firmware and updating the access point are two separate tasks that are combined in the
following procedure.
To download new firmware manually and update your access point:
1. Visit downloadcenter.netgear.com, locate the support page for your product, and download the new
firmware.
2. Read the new firmware release notes to determine whether you must reconfigure the access point after
updating.
3. Open a web browser from a computer that is connected to the same network as the access point or to
the access point directly through an Ethernet cable or WiFi connection.
4. Enter the IP address that is assigned to the access point.
A login window opens.
5. Enter the access point user name and password.
The user name is admin. The default password is password. The user name and password are
case-sensitive.
The Home page displays.
6. Select Administration > Firmware Update.
The Firmware Update page displays.
7. Locate and select the firmware file on your computer by doing the following:
a. Click the Browse button.
b. Navigate to the firmware file.
The file ends in .img. An example of a firmware file name is WAC104_V1.0.3.7.img.
c. Select the firmware file.
8. Click the Upload button.
WARNING:
To avoid the risk of corrupting the firmware, do not interrupt the update. For
example, do not close the browser, click a link, or load a new page. Do not
turn off the access point. Wait until the access point finishes restarting and
the Power LED remains solid green.
Manage the Access Point and Monitor the Traffic
35
802.11ac Wireless Access Point Model WAC104
Loading...
Terms of Use | Privacy Policy | DMCA Policy
2006-2020 Rsmanuals.com