Loading...
The configuration is reset to factory default settings. When the reset is complete, the access point
reboots. This process takes about two minutes.
WARNING:
To avoid the risk of corrupting the firmware, do not interrupt the reset. For
example, do not close the browser, click a link, or load a new page. Do not
turn off the access point. Wait until the access point finishes restarting and
the Power LED remains solid green.
Change the IP Address Settings of the Access Point
Under some circumstances, for example, when you move the access point from one network to another,
you might need to change the IP address settings of the access point.
For information about connecting the access point to your router or network, see Set Up and Connect the
Access Point to Your Router or DHCP Server on page 11 and Connect and Log In to the Access Point for
Initial Configuration on page 12.
The following procedure describes how you can either configure a static IP address or reenable the DHCP
client of the access point.
To change the IP settings of the access point:
1. Open a web browser from a computer that is connected to the same network as the access point or to
the access point directly through an Ethernet cable or WiFi connection.
2. Enter the IP address that is assigned to the access point.
A login window opens.
3. Enter the access point user name and password.
The user name is admin. The default password is password. The user name and password are
case-sensitive.
The Home page displays.
Manage the Access Point and Monitor the Traffic
40
802.11ac Wireless Access Point Model WAC104
Loading...
Terms of Use | Privacy Policy | DMCA Policy
2006-2020 Rsmanuals.com