Loading...
3. Enter the access point user name and password.
The user name is admin. The default password is password. The user name and password are
case-sensitive.
The Home page displays.
4. Select Administration > Attached Devices.
Wired devices are connected to the access point with Ethernet cables. WiFi devices are connected to
the access point through the WiFi network, in either the 2.4 GHz band or the 5 GHz band.
The following table describes the fields on the Attached Devices page.
DescriptionField
Wired Devices
For LAN devices, the status is always Allowed.Status
The device name, if detected.Device Name
The IP address that is assigned to the device when it joined the network. This address can
change when a device is disconnected and rejoins the network.
IP Address
The unique MAC address. The MAC address does not change and is usually shown on the
product label.
MAC Address
For LAN devices, the connection type is always Wired.Connection Type
Wireless Devices
If access control is enabled (see Manage Access to the WiFi Network Through a WiFi Access
List on page 52), the access control status of the device in the network (Allowed or Blocked).
Status
The device name, if detected.Device Name
The basic service set identifier (BSSID), which is the MAC address of the radio to which the
WiFi device is connected.
BSSID
The service set identifier (SSID) or WiFi network name that the WiFi device is using.SSID
The type of WiFi security, if any, for the WiFi network to which the device is connected.Type
The radio to which the WiFi device is connected (2.4 GHz or 5 GHz).Radio
Manage the Access Point and Monitor the Traffic
42
802.11ac Wireless Access Point Model WAC104
Loading...
Terms of Use | Privacy Policy | DMCA Policy
2006-2020 Rsmanuals.com