Factory Default Settings
You can reset the access point to the factory default settings, which are shown in the following table.
For more information about resetting the access point to its factory settings, see Return the Access Point
to Its Factory Default Settings on page 38.
Table 2. WAC104 access point factory default settings
Access point login
192.168.0.100User login IP address
www.aplogin.net (for initial configuration only)User login URL
admin, nonconfigurableUser name (case-sensitive)
The access point functions as a bridge between its WiFi
and LAN clients and the router in your network. The
access point does not provide routing services such as
NAT and a DHCP server.
See the access point label.SSID names
WPA and WAP2 mixed mode
The default WiFi passphrase is on the access point label.
•North America: United States
•Other continents: Varies by region
Auto. The available channels depend on the region.RF channel
•Up to 300 Mbps at 2.4 GHz
•Up to 867 Mbps at 5 GHz
WiFi operating mode
Factory Default Settings and Technical Specifications
802.11ac Wireless Access Point Model WAC104