Loading...
Setting the network parameters manually
Set the network parameters (such as IP address, Subnet Mask, and Default Gateway)
manually.
Setup menu
“Network” > “IP Address”
1Set “DHCP” to “Off”.
2Use the cursor keys to select a parameter type.
IP Address Specifies an IP address.
Subnet Mask Specifies a subnet mask.
Default Gateway Specifies the IP address of the default gateway.
DNS Server (P) Specifies the IP address of the primary DNS server.
DNS Server (S) Specifies the IP address of the secondary DNS server.
3Use the cursor keys to move the edit position and to select a
value.
4To set another parameter, press RETURN and repeat steps 2 to 3.
5Press SETUP.
This completes the settings.
Setting the MAC address filter
Sets the MAC address filter to limit access to the unit from other network devices.
Note
Op4r0t8on o5 t74 A8rPl0y 5un2t8on or t74 DMC 8s not l8m8t43 1y t78s s4tt8n6.
You 20n sp4285y up to  n4twork 34v824s t70t 0r4 p4rm8tt43 to 0224ss t74 un8t.
Setup menu
“Network” > “MAC Address Filter” > “Filter”
Settings
Off Disables the MAC address filter.
On Enables the MAC address filter. Specify the MAC addresses of the
network devices that will be permitted access to the unit.
When selecting “On”
1Use the cursor keys to select an MAC address number.
2Use the cursor keys to move the edit position and to select a
value.
3To specify another MAC address, press RETURN and repeat steps
1 to 2.
4Press SETUP.
This completes the settings.
En
110
Loading...
Terms of Use | Privacy Policy | DMCA Policy
2006-2020 Rsmanuals.com