Loading...
Selecting the HDMI 4K signal format (4K MODE)
ENHANCER
LINK
ECO
MASTER
OUT
2
-
R
es
Hi
YPAO
VOL.
A
-
DRC
SLEEP
STEREO
PARTY
TUNED
ZONE
3 B2 A
VOL .
FPR
SL
SW
SR
SBL SB SB R
FPL
MUT E VIR TUAL
4K MODE•MODE 1
Selects the format of signals input/output at the unit when HDMI 4K compatible TV and
playback device are connected to the unit.
ADVANCED SETUP menu
“4K MODE”
Settings
MODE 1
Inputs/outputs 4K signals shown in the following table. Depending on the
connected device or HDMI cables, video may not be displayed correctly.
In this case, select “MODE 2”.
MODE 2 Inputs/outputs 4K signals shown in the following table.
Note
W74n MODE  8s s4l42t43, us4 0 Pr4m8um H867 Sp443 HDMI C01l4 or Pr4m8um H867 Sp443 C01l4 w8t7
Et74rn4t.
Format
MODE 1 MODE 2
8 bit 10 bit 12 bit 8 bit 10 bit 12 bit
4K/60, 50 Hz
RGB 4:4:4 4– –
YCbCr 4:4:4 4– –
YCbCr 4:2:2 4
YCbCr 4:2:0 4 4
4K/30, 25, 24 Hz
RGB 4:4:4 4 4
YCbCr 4:4:4 4 4
YCbCr 4:2:2 4 4
Backuping and restoring all the settings (BKUP/RSTR)
ENHANCER
LINK
ECO
MASTER
OUT
2
-
R
es
Hi
YPAO
VOL.
A
-
DRC
SLEEP
STEREO
PARTY
TUNED
ZONE
3 B2 A
VOL .
FPR
SL
SW
SR
SBL SB SB R
FPL
MUT E VIR TUAL
BKUP/RSTR•BKUP
Backups and restores all the unit's setting to a USB memory device. Prepare a USB
memory device using FAT16 or FAT32 format in advance.
ADVANCED SETUP menu
“BKUP/RSTR”
Settings
RSTR Restores all the previous backuped settings.
BKUP Backups all the settings.
1Connect the USB memory device to the USB jack on the front
panel.
2To start the process, press STRAIGHT to select “BKUP” or
RSTR” and then press INFO on the front panel.
3Press INFO again after the confirmation message appears on the
front display.
4When “Complete” appears on the front display, press z (power)
to set the unit to standby mode and turn it on again.
If “Failed” appears on the front display, check the following and start the
process again.
En
117
Loading...
Terms of Use | Privacy Policy | DMCA Policy
2006-2020 Rsmanuals.com