Loading...
Video trouble
nNo video
lAnother input source is selected on the unit.
Select an appropriate input source with the input selection keys.
lAnother input source is selected on the TV.
Switch the TV input to display the video from the unit.
lThe video signal output from the unit is not supported by the TV.
Check the video output setting of the playback device. For information about video
signals supported by the TV, refer to the instruction manuals for the TV.
lThe cable connecting the unit and TV (or playback device) is defective.
If there is no problem with the connection, replace with another cable.
nNo video from the playback device connected to the
unit with HDMI
lThe input video signal (resolution) is not supported by the unit.
To check the information about the current video signal (resolution) and video
signals supported by the unit, see the following:
– “Checking information about the video/audio signals” (p.82)
– “HDMI signal compatibility” (p.146)
lThe TV does not support HDCP (High-bandwidth Digital Content Protection).
Refer to the instruction manuals for the TV and check the TV’s specifications.
lThe number of devices connected to the HDMI OUT jack is over the limit.
Disconnect some of the HDMI devices.
nNo image (contents required the HDCP 2.2 - compatible
HDMI device) from the playback device
lThe TV (HDMI input jack) does not support HDCP 2.2.
Connect the unit to the TV (HDMI input jack) that supports HDCP 2.2. (The
Warning message can be displayed on the TV screen.)
nThe menu of the unit is not displayed on the TV
lThe TV is not connected to the unit via HDMI.
You can display the menu of the unit on the TV only when they are connected with
an HDMI cable. If necessary, use an HDMI cable to connect them. For details, see
the following:
– “HDMI connection with a TV” (p.24)
lAnother input source is selected on the TV.
Switch the TV input to display the video from the unit (HDMI OUT jack).
En
124
Loading...
Terms of Use | Privacy Policy | DMCA Policy
2006-2020 Rsmanuals.com