Loading...
Accessory CD-ROM Installation Guide
Owner’s Manual
104
Reference
System Requirements
Software Installation
If you have any problems with the installation, refer to
the troubleshooting section on page 106.
Installing / Updating the USB-MIDI
Driver
In order to be able to communicate with and use MIDI
instruments connected to your computer, the appropri-
ate driver software must be properly installed on your
computer.
The USB-MIDI driver allows sequence software and
similar applications on your computer to transmit and
receive MIDI data to and from instruments via a USB
cable.
Follow the steps below to install (or update) the USB-
MIDI driver.
1Disconnect all USB devices from the
computer except for the mouse and
computer keyboard.
2Start the computer and use the “Admin-
istrator” account to log on to Windows.
Close all applications and windows that are open.
3Insert the Accessory CD-ROM into your
computer’s CD-ROM drive.
4Turn off the power of the instrument.
5Connect the USB connector of the com-
puter to the USB TO HOST terminal of
the MIDI instrument with a standard
USB cable.
6Turn on the power of the instrument(s).
7When the “Found New Hardware Wiz-
ard” window appears, click [Cancel].
Data OS Computer Memory Hard Disk Display
Musicsoft
Downloader
Windows 2000/XP Home
Edition/XP Professional/Vista
* Only 32-bit is supported.
Windows 7
233 MHz or higher; Intel Pen-
tium/Celeron Processor family
(500 MHz or higher is recom-
mended)
64 MB or more
(256 MB or more is
recommended)
128 MB or more
(at least 512 MB
of free space is
recommended)
800 x 600
HighColor
(16-bit)
USB Driver
for Windows
Windows XP Professional
(SP2/SP3)/XP Home Edition
(SP2/SP3)/2000 (SP4)
166 MHz or higher; Intel Core/
Pentium/Celeron processor
32 MB or more
(64 MB or more is
recommended)
10 MB or more
Windows XP Professional x64
Edition (SP2) Intel 64 compatible processor 256 MB or more 10 MB or more
Windows Vista (SP0/SP1/SP2)
800 MHz or higher; Intel Core/
Pentium/Celeron processor or
Intel 64 compatible processor
512 MB or more 10 MB or more
Windows 7
1.4 GHz or higher; Intel Core/
Pentium/Celeron processor or
Intel 64 compatible processor
1 GB or more
(32-bit)/2 GB or
more (64-bit)
10 MB or more
• The example displays shown in this guide are in English.
NOTE
MIDI instrument
Computer
Sequence
software
Driver
USB Cable
• Do not use a USB hub for connecting multiple USB
devices.
• If you are using several MIDI instruments with USB con-
nection at the same time, connect all the instruments to
the computer and turn on the power for all of them, then
perform the following installation procedure.
• On some computers, it may take a few minutes before
this screen appears.
NOTE
NOTE
NOTE
Loading...
Terms of Use | Privacy Policy | DMCA Policy
2006-2020 Rsmanuals.com