NETGEAR RangeMax™ NEXT Wireless Router WNR834B User Manual
Safeguarding Your Network 2-7
v2.1, July 2007
with the correct Passphrase. Similarly, when you use WPA2-PSK, the other devices in the
network will not connect unless they are also set to WPA2-PSK and are configured with
the correct Passphrase.
Use the procedures described in the following sections to configure the WNR834B. Store this
information in a safe place.
Configuring WEP Wireless Security
To configure WEP data encryption, follow these steps:
1. From the main menu of the browser interface, under Setup, click Wireless Settings.
2. From the Security Options menu, select WEP. The WEP options display.
3. Select the Authentication Type and Encryption strength.
Note: If you use a wireless computer to configure WEP settings, you will be disconnected
when you click Apply. You must then either configure your wireless adapter to
match the wireless router WEP settings or access the wireless router from a wired
computer to make any further changes.
Terms of Use | Privacy Policy | DMCA Policy
2006-2020 Rsmanuals.com