genie ADVANCED Home
A750 Wireless Dual Band Gigabit Router JR6150
2. Select ADVANCED > Setup > QoS Setup.
3. Select the Turn Internet Access QoS On check box.
WMM QoS is enabled by default. NETGEAR recommends that you leave this setting as it
is for full 802.11n wireless rate support.
4. To limit the bandwidth that is available for traffic from the router to the Internet, select the
Turn Bandwidth Control On check box.
For more information, see Bandwidth Control on page 53.
5. Manage the QoS rules.
For more information about how to manage and create QoS rules, which are also referred
to as QoS policies, see Manage QoS Rules on page 54.
6. To allocate half of the WAN bandwidth to a special host in heavy traffic situations, select
the Enable Trusted IP address check box.
In the field that is provided, enter the IP address of the trusted host.
7. Click the Apply button.
Your settings are saved.
Bandwidth control lets you set a limit to the bandwidth that is available for traffic from the
router to the Internet.
To set the maximum uplink bandwidth:
1. Log in to the router.
For more information, see Use NETGEAR genie after Installation on page 17.