Loading...
43
reface CS/DX/CP/YC Owner’s Manual
Appendix
Local Control
For setting whether to internally disconnect (“off”) or connect (“ON”) the instrument’s internal tone
generator and keyboard. If you wish to control your reface’s internal tone generator by using an
external MIDI controller but not its keyboard, set MIDI Control to “ON” and Local Control to “off.”
Factory default setting: ON
Display when set
Sustain (reface DX and reface CP)
For switching the sustain setting. If you have connected a foot pedal (FC3) or a foot switch (FC4 or
FC5) to the instrument, you will need to set either “FC3” or “FC4/5” depending on whether or not it
supports half-damper operation.
Factory default settings:
DX: FC4/5 (an FC4 or FC5, or an FC3 without half-damper operation)
CP: FC3 (an FC3 with half-damper operation)
Display when set
Transmit Channel (reface CS and reface DX)
For setting the MIDI transmit channel. This parameter can be set to either “1 ch” (Channel 1) or
“off.”
Factory default settings: 1 ch (Channel 1)
Display when set
On the reface DX, channels 2 to 16 can also be selected on the MIDI Settings screen, which is dis-
played by using the [FUNCTION] button. For details, refer to “Functions of Front Panel Compo-
nents” for the reface DX (page 16).
CS ON: The lamps from the LOOPER section light up.
off: The lamps from the LOOPER section flash.
DX “Local control ON” or “Local control off” is displayed on-screen.
CP
ON: The [TYPE] knob’s Clv lamp and the lamps from the TREMOLO/WAH to D.DELAY/
A.DELAY sections light up.
off: The [TYPE] knob’s Clv lamp and the lamps from the TREMOLO/WAH to D.DELAY/
A.DELAY sections flash.
YC ON: The ROTARY SPEED lamps light up.
off: The ROTARY SPEED lamps flash.
DX “Sustain FC3” or “Sustain FC4/5” is displayed on-screen.
CP
FC3: The [TYPE] knob’s Clv lamp and the lamps from the TREMOLO/WAH to D.DELAY/
A.DELAY sections light up.
FC4/5: The [TYPE] knob’s Clv lamp and the lamps from the TREMOLO/WAH to D.DELAY/
A.DELAY sections flash.
CS 1 ch: The lamps from the LOOPER section light up.
off: The lamps from the LOOPER section flash.
DX “MIDI transmit ch 1” or “MIDI transmit ch off” is displayed on-screen.
Loading...
Terms of Use | Privacy Policy | DMCA Policy
2006-2020 Rsmanuals.com