Additional functions using the PC interface
Carrying out a firmware update
¤Connect the telephone and the PC using a USB data cable Launch Gigaset QuickSync
Establish connection to the handset
¤Start firmware update in Gigaset QuickSync . . . Information about this can be found in
Gigaset QuickSync help feature
The update process may take up to 10 minutes (not including download time).
The data are first downloaded from the online update server. The time required for this depends
on Internet connection speed.
The display on your telephone is switched off and the Message key and the Talk key
Once the update is complete, your telephone will automatically restart.
Procedure in the event of an error
If the update procedure fails or the telephone no longer functions properly after the update,
repeat the update procedure:
¤End the Gigaset QuickSync program on the PC Remove the USB data cable from the
telephone Remove the battery Replace the battery
¤Carry out the firmware update again as described above
If the update procedure fails more than once or it is no longer
possible to connect to the PC, carry out the Emergency Update:
¤End the Gigaset QuickSync program on the PC Remove
the USB data cable from the telephone Remove the bat-
¤Press and hold keys and at the same time with the
forefinger and middle finger Replace the battery
¤Release keys and . . . the Message key and
the Talk key will flash alternately
¤Carry out the firmware update as described above
Do not interrupt the process and do not remove the USB data cable.
Always save pictures and sounds uploaded onto the handset on the PC, as they are
deleted during an Emergency Update.