Loading...
After you reset the modem router to factory default settings, the user name is admin, the password is password, the
LAN IP address is 192.168.0.1 (which is the same as www.routerlogin.net), and the DHCP server is enabled. For
a list of factory default settings, see Factory Settings on page 295.
Use the Reset Button
CAUTION:
This process erases all settings that you configured in the modem router.
To reset the modem router to factory default settings:
1. On the back of the modem router, locate the Reset button to the right of the leftmost antenna.
2. Using a straightened paper clip, press and hold the Reset button for at least five seconds.
3. Release the Reset button.
The Power LED starts blinking amber and the configuration is reset to factory default settings. When the reset
is complete, the modem router reboots. This process takes about two minutes.
WARNING:
To avoid the risk of corrupting the firmware, do not interrupt the reset. For example,
if you are connected to the modem router’s web page, do not close the browser, click
a link, or load a new page. Do not turn off the modem router. Wait until the modem
router finishes restarting and the Power LED turns solid white.
Erase the Settings
CAUTION:
This process erases all settings that you configured in the modem router.
Manage the Modem Router and Monitor the Traffic
222
Nighthawk X4S AC2600 WiFi VDSL/ADSL Modem Router Model D7800
Loading...
Terms of Use | Privacy Policy | DMCA Policy
2006-2020 Rsmanuals.com