USB Storage
N300 Wireless ADSL2+ Modem Router DGN2200M Mobile Edition
Note: The USB port on the wireless modem router can be used only to
connect USB storage devices like flash drives or hard drives. Do not
connect computers, USB modems, printers, CD drives, or DVD
drives to the USB port.
Note: Because the USB port on the wireless modem router is used for
connecting the broadband mobile modem cable, you are not able to
use the USB port for both a ReadyShare storage and a broadband
mobile Internet connection at the same time even when using a USB
hub to fan out the USB port.
This chapter includes the following sections:
USB Drive Requirements
File-Sharing Scenarios
USB Storage Basic Settings
Configure USB Storage Advanced Settings
Unmount a USB Drive
Specify Approved USB Devices
Connect to the USB Drive from a Remote Computer
Connect to the USB Drive with Microsoft Network Settings
USB Drive Requirements
The wireless modem router works with 1.0 and 1.1 (USB full speed) and 2.0 (USB high
speed) standards. The approximate USB bus speeds are shown in the following table.
Bus Speed/Second
USB 1.1 12 Mbits
USB 2.0 480 Mbits
Actual bus speeds can vary, depending on the CPU speed, memory, speed of the network,
and other variables. The wireless modem router should work with USB 2.0-compliant or
1.1-compliant external flash and hard drives. For the most up-to-date list of USB drives
supported by the wireless modem router, go to
When selecting a USB device, bear in mind the following:
Terms of Use | Privacy Policy | DMCA Policy
2006-2020 Rsmanuals.com