Loading...
Advanced Configuration
93
N300 Wireless ADSL2+ Modem Router DGN2200M Mobile Edition
Multi-Point Bridge
Multi-point bridge mode allows a router to bridge to multiple peer access points
simultaneously. Wireless client associations are disabled. Only wired clients can be
connected. Multi-point bridge mode configuration includes the following steps:
1. Enter the MAC addresses of the other access points in the fields provided.
2. Set the other bridge-mode access points to point-to-point bridge mode, using the MAC
address of this DGN2200M Mobile Edition as the remote MAC address.
3. Use wireless security to protect this traffic.
Internet
LAN Segment 1
Computers
Computers
Hub or switch
AP 3
AP 2
192.168.0.1
Point-to-point
bridge mode
bridge mode
Point-to-point
AP 1
DGN2200M
Computers Hub or switch
LAN Segment 3
LAN Segment 2
Figure 2. Multi-point bridge mode
To set up the multi-point bridge configuration:
1. Configure the operating mode of the wireless modem routers.
Because it is in a central location, configure the DGN2200M Mobile Edition wireless
modem router (AP 1) on LAN segment 1 in point-to-multi-point bridge mode, and
enter the MAC addresses of AP 2 and AP 3 in the Remote MAC Address 1 and
Remote MAC Address 2 fields.
Configure the access point (AP 2) on LAN segment 2 in point-to-point bridge mode
with the remote MAC address of the DGN2200M Mobile Edition wireless modem
router.
Configure the access point (AP 3) on LAN segment 3 in point-to-point bridge mode
with the remote MAC address of the DGN2200M Mobile Edition wireless modem
router.
2. Disable the DHCP server on AP 2 and AP 3. AP 1 will then be the DHCP server.
3. Verify the following for all access points:
Loading...
Terms of Use | Privacy Policy | DMCA Policy
2006-2020 Rsmanuals.com