Loading...
Factory Settings
You can return the router to its factory settings. Use the end of a paper clip or a similar object to press and hold the
Reset button on the back of the router for at least seven seconds. The router resets and returns to the factory
configuration settings shown in the following table.
Table 4. Factory default settings
Default BehaviorFeature
www.routerlogin.com or www.routerlogin.netUser login URLRouter login
adminUser name (case-sensitive)
passwordLogin password (case-sensitive)
Use default hardware addressWAN MAC addressInternet connection
1500WAN MTU size
AutoSensingPort speed
192.168.1.1LAN IPLocal network (LAN)
255.255.255.0Subnet mask
EnabledDHCP server
192.168.1.2 to 192.168.1.254DHCP range
Pacific timeTime zone
192.168.1.2DHCP starting IP address
192.168.1.254DHCP ending IP address
DisabledDMZ
DisabledTime adjusted for daylight saving time
Disabled
SNMP
Disabled (except traffic on port 80, the HTTP port)Inbound (communications coming in from
the Internet)
Firewall
Enabled (all)Outbound (communications going out to
the Internet)
DisabledSource MAC filtering
Supplemental Information
191
Loading...
Terms of Use | Privacy Policy | DMCA Policy
2006-2020 Rsmanuals.com