Loading...
Connect to the Network and Access the Router
18
N600 WiFi Dual Band Gigabit Router
Make sure that the computer is connected to one of the four LAN Ethernet ports or
wirelessly to the router.
Make sure that the router is receiving power and that its Power LED is lit green.
Close and reopen the browser or clear the browser cache.
Browse to http://www.routerlogin.net.
If the computer is set to a static or fixed IP address (this setting is uncommon),
change it to obtain an IP address from the router automatically.
6. If the router does not connect to the Internet, do the following:
a. Review your settings. Make sure that you selected the correct options and typed
everything correctly.
b. Contact your ISP to verify that you are using the correct configuration information.
c. Read Chapter 13, Troubleshooting. If problems persist, register your NETGEAR
product and contact NETGEAR technical support.
Log In to the Router
When you first set up your router, NETGEAR genie automatically starts when you launch a
web browser on a computer that is connected to the router. If you want to view or change
settings for the router, you can use genie again.
To log in to the router:
1. Launch a web browser from a computer or wireless device that is connected to the
network.
2. Type http://www.routerlogin.net or http://www.routerlogin.com.
A login screen displays.
3. Enter the router user name and password.
The user name is admin. The default password is password. The user name and
password are case-sensitive.
The BASIC Home screen displays.
Change the Language
By default, the language is set to Auto.
To change the language:
1. Launch a web browser from a computer or wireless device that is connected to the
network.
2. Type http://www.routerlogin.net or http://www.routerlogin.com.
A login screen displays.
3. Enter the router user name and password.
Loading...
Terms of Use | Privacy Policy | DMCA Policy
2006-2020 Rsmanuals.com