Configuring the VoIP connection
Prerequisite for the following steps:
Before you can use VoIP to phone any other subscribers on the Internet, the fixed line network or
the mobile phone network, you need a VoIP account.
>Set up a VoIP account with a VoIP provider.
>Have your VoIP account data you received from your VoIP provider to hand.
You will need:
>Your registration name (login ID), your password and, if applicable (provider-dependent), a user
>Your personal auto-configuration code (activation code), if your provider supports "automatic
Instead of using the following procedure, you can also enter the VoIP access data and the assign-
ment of the VoIP connection as send and receive connection using your PC (steps to ):
>Launch the Web browser on your PC.
>Enter the URL www.gigaset-config.com in the address field of the web browser and press the
You are connected to your base's Web configurator. To register with the Web configurator, you will
need the system PIN for the phone (default setting: 0000).
A description of the Web configurator can be found in the user guide on the enclosed CD and in
the Web configurator online help document.
*) Automatic configuration:
If your provider supports "automatic configuration", you will receive an "auto-configuration code" instead of an
authentication name and password.
VoIP configuration with an auto-configuration code is described in the user guide on the enclosed CD.
After configuration, please proceed as described in .