Loading...
Manage the Internet Settings Manually
50
AC1600 WiFi VDSL/ADSL Modem Router Model D6400
13. Enter the ADSL settings as described in the following table.
Field Description
Multiplexing Method Select LLC-BASED or VC-BASED, as indicated by your ISP.
The multiplexing method can either be virtual circuit (VC) based or logical
link control (LLC) based.
VPI Enter a number between 0 and 255 for the virtual circuit number for the
virtual path identifier (VPI), as indicated by your ISP.
If your ISP did not provide you with a VPI setting, leave the default setting
(0). The VPI might be required not only for a VC-based connection but also
for an LLC-based connection.
VCI Enter a number between 32 and 65535 for the virtual circuit number for the
virtual channel identifier (VCI), as indicated by your ISP.
If your ISP did not provide you with a VCI setting, leave the default setting
(35). The VCI might be required not only for a VC-based connection but
also for an LLC-based connection.
Use VLANID Select the Use VLANID check box and enter the VLAN ID, as indicated by
your ISP.
A VLAN ID might be required if you subscribe to both Internet service and
IPTV service. If your ISP did not provide you with a VLAN ID, leave the Use
VLANID check box cleared, which is the default setting.
For information about setting up VLAN tag groups, see Set Up a Bridge for
a VLAN Tag Group on page 196.
Priority (802.1p) If your ISP provided you with a VLAN ID and a priority value, enter the
priority value, which is a number from 0 to7.
You can enter a priority value only in combination with a VLAN ID. If your
ISP did not provide you with a priority value, leave the default setting (0).
Bridge Mode (bind LAN4 to
WAN2)
This setting is an option that applies to the IPTV interface only. To bind LAN
port 4 to the IPTV interface (that is, the WAN2 virtual interface), select the
Bridge Mode (bind LAN4 to WAN2) check box.
For more information, see Enable Bridge Mode for an IPTV Device on
page 198.
Account Name (If Required) Enter the account name, as indicated by your ISP. This name might also be
called the host name.
If your ISP did not provide you with an account name or host name, leave
this field blank.
Domain Name (If Required) Enter the domain name, as indicated by your ISP.
If your ISP did not provide you with a domain name, leave this field blank.
Internet IP Address
Get Dynamically from ISP Your ISP uses DHCP to assign your IP address. Your ISP automatically
assigns these addresses.
Use Static IP Address Enter the IP address, IP subnet mask, and gateway IP address that your
ISP assigned you for static IP address service. The gateway is the ISP
router to which your modem router connects.
Loading...
Terms of Use | Privacy Policy | DMCA Policy
2006-2020 Rsmanuals.com