Loading...
146 MOTIF Reference
Voice Edit mode
Reference Voice mode
• TIME
Settings 0 ~ 127 (excluding --- above)
•LEVEL
Settings 0 ~127
[F4]-[SF4] Normal Element Amplitude
Key Follow
From this display you can set the Key Follow effect
for Amplitude — in other words, how the volume of
the element and its Amplitude EG respond to the
particular notes (or octave range) you play.
nThe availability of the Amplitude Key Follow
parameter depends on the Break Point and Offset
settings described on see below.
•LevelSens (Level Sensitivity)
Determines the degree to which the notes (specifically,
their position or octave range) affect the volume of the
selected element. A Center Key setting of C3 is used as the
basic setting.
A positive setting will lower the output level for lower
notes and raise it for higher notes. A negative setting will
have the opposite effect.
Settings -200% ~ 0 ~+200%
• CenterKey
This indicates that the central note for Level Sensitivity
above is C3. At C3, the volume (level) remains unchanged.
For other notes played, the volume varies according to the
particular note and the Level Sensitivity setting. Keep in
mind that this is for display purposes only; the value
cannot be changed.
•EGTimeSens (EG Time Sensitivity)
Determines the degree to which the notes (specifically, their
position or octave range) affect the Amplitude EG times of
the selected element. The Center Key (next parameter) is
used as the basic amplitude for this parameter.
A positive setting will cause the amplitude of lower notes to
change slower and that of higher notes to change faster.
Negative values will have the opposite effect.
Settings -64 ~ 0 ~ +63
• CenterKey
Determines the central note or pitch for the Key Follow
effect on Amplitude EG. Depending on the EG Time
Sensitivity parameter above, the further away from the
Center Key the keys are played, the more the time of the
Amplitude EG deviates from the norm.
When the Center Key is played, the AEG behaves
according to its actual settings. The amplitude change
characteristics for other notes will vary in proportion to
the EGTime settings.
Settings C -2 ~ G8
nYou can also set the Center Key directly from the
keyboard, by holding down the [INFORMATION]
button and pressing the desired key.
[F4]-[SF5] Normal Element Amplitude Scaling
Amplitude Scaling controls the output level (set in
the [F4]-[SF1] display) according to the positions of
the notes on the keyboard. You can divide the entire
keyboard by four break points, and assign different
offset values of amplitude to them respectively.
BREAK POINT 1 ~ 4
Settings C -2 ~ G8
nYou can also set the Break Point directly from the
Keyboard, by holding down the [INFORMATION]
button and pressing the desired key. See “Basic
Operation” on page 75.
• OFFSET 1 ~ 4
Settings -128 ~ 0 ~ +127
0
Release
Level
Attack
Level
Attack
Time
Decay1
Time
Decay2
Time
Release
Time
Decay2
Level Key off
Time
Decay1
Level
Level
Init
Level
Center(basic pitch) Higher range
Lower range
Large
Small
+
Speed of AEG
level change
Center (basic volume)
Higher range
Lower range
Center (basic volume)
Higher range
Lower range
+
Speed of AEG
level change
Speed of AEG
level range
Positive value
Negative value +
Loading...
Terms of Use | Privacy Policy | DMCA Policy
2006-2020 Rsmanuals.com