Loading...
174 MOTIF Reference
Performance Edit mode
Reference Performance mode
• Release
Determines the FEG Release Time for each part.
Settings -64 ~ 0 ~ +63
nThe FEG settings are not available for Plug-in
parts or parts to which Drum voices have been
assigned.
[F4]-[SF4] Part Tone AEG
Basic Structure (page 47)
From this display you can set the basic AEG
(Amplitude Envelope Generator) parameters for
each part. The following parameters offset the
same parameters in the Voice (Element) Edit
mode (page 145).
• Attack
Determines the AEG Attack Time for each part.
Settings -64~0~+63
• Decay
Determines the AEG Decay Time for each part.
Settings -64~0~+63
• Sustain
Determines the AEG Sustain Level for each part.
Settings -64~0~+63
nThe Sustain level setting is not available for Plug-in
parts or parts to which Drum voices have been
assigned.
• Release
Determines the AEG Release Time for each part.
Settings -64~0~+63
nThe Release Time setting is not available for the
part to which the Drum Voice is assigned.
[F5] Part Receive Switch
From this display you can set how each individual
part responds to various MIDI data, such as Control
Change and Program Change messages. When the
relevant parameter is set to “on,” the corresponding
part responds to the appropriate MIDI data.
Note that two different display types are provided
(see below). Each display type features the same
settings in a different format; use the type you feel
most comfortable with.
[SF5]button
Loading...
Terms of Use | Privacy Policy | DMCA Policy
2006-2020 Rsmanuals.com